The following takes you to understand the maintenance of BCJ52 series explosion-proof emergency lights:
BCJ52 series explosion-proof emergency lights maintenance 1, fire emergency lights should be installed or stored in a dry, ventilated and non-corrosive place.
2. When using fire emergency lights, you should try to avoid being hit and knocked.
3. Check the running status of the lamps regularly every month, and always pay attention to whether the working indicator lights work in the normal state.
4. In normal use, charge the lamp once every six months to avoid early failure of the battery.
5. When the lamps are not used for a long time, the batteries should be discharged and vented. When the lamps are re-worked, they must be charged for about 18-24 hours before the lamps can work normally.
6, the product in order to better protect the light source and reflective light from dust, specifically set a beautiful dust cap on the lamp (can not be used).
BCJ52 series explosion-proof emergency lights use matters needing attention:
1. When the light is transported, it should be installed in the equipped carton and be equipped with foam shock absorption.
2. When installing the lamp, the lamp should be safely grounded.
3, when used, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the temperature of the center of the transparent part is relatively high and must not be touched.
4. When maintaining the lamp, you must disconnect the power supply.
BCJ52 series explosion-proof emergency lights maintenance 1, fire emergency lights should be installed or stored in a dry, ventilated and non-corrosive place.
2. When using fire emergency lights, you should try to avoid being hit and knocked.
3. Check the running status of the lamps regularly every month, and always pay attention to whether the working indicator lights work in the normal state.
4. In normal use, charge the lamp once every six months to avoid early failure of the battery.
5. When the lamps are not used for a long time, the batteries should be discharged and vented. When the lamps are re-worked, they must be charged for about 18-24 hours before the lamps can work normally.
6, the product in order to better protect the light source and reflective light from dust, specifically set a beautiful dust cap on the lamp (can not be used).
BCJ52 series explosion-proof emergency lights use matters needing attention:
1. When the light is transported, it should be installed in the equipped carton and be equipped with foam shock absorption.
2. When installing the lamp, the lamp should be safely grounded.
3, when used, the surface of the lamp has a certain temperature rise, which is a normal phenomenon; the temperature of the center of the transparent part is relatively high and must not be touched.
4. When maintaining the lamp, you must disconnect the power supply.
The junction box can be equipped with high
temperature wire in front of the factory, and the lead wire is protected by
armored cable or metal weaving. Its role is to make the submersible cable,
because of the street submersible motor, the company's small flat cable head
production equipment is complete, can be made of wound type, plug-in small flat
cable head.
Leader Cable
Leader Cable,Cable High Temperature,Tinned Copper Cable,Flexible Silicone Rubbe
Tianjin RongHeng Group LLC , https://www.ronghenggrouppump.com