Model NO.: TYA
Impurity Size: ≤1 Micron
Gas Content: ≤0.1%
Trademark: TOP
Transport Package: Wooden Case
Specification: ISO/CE
Origin: China
HS Code: 8421299090
Model NO.: TYA
Impurity Size: ≤1 Micron
Gas Content: ≤0.1%
Trademark: TOP
Transport Package: Wooden Case
Specification: ISO/CE
Origin: China
HS Code: 8421299090
Industry Lube Oil Polishing System (TYA)




Product Application
Series TYA is widely used in metallurgy, machinery, oil field, chemistry, mine, electric power generation plant,
transportation and manufacturing enterprises for hydraulic oil, gear oil, engine oil, compression oil, freezer oil,
heat treatment oil, compressor oil, refrigeration oil and other industrial oils. It can remove water, gas and eliminate
mechanical impurities, light acid and light hydrocarbon from oil, and improve oil quality, resume its lubricating
property and ensure normal operation of the equipment.


Product Features
1. Three grades filtering structure, including primary filter, second filter and fine filter. Large capacity for holding
particles, Multi-stage filtration system to ensure high filtration precision.
2. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles
3. Duplex-Stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can
rapidly and effectively remove water, gas, particles and volatile matter (such as alcohol, gasoline, ammonia etc.)
4. Automatic backwashing system, improving working efficiency
5. Advanced air cooling system
6. Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank
heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
7. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
8. High quality filtering components, large capacity for holding particles, anti-corrosion, good mechanical
performance, long lifetime.
Industry Lube Oil Polishing System (TYA)


Technical Parameter
 
Parameters Unit TYA-10 TYA -20 TYA -30 TYA -50 TYA -100 TYA -150 TYA -200 TYA -300
Flow rate L/h 600 1200 1800 3000 6000 9000 12000 18000
Vacuum degree Mpa -0.06 ~- 0.095
Working pressure Mpa ≤0.4
Temperature degree °C 0~100
Power supply
 		 3Phase, 380V, 50Hz(or as needed)
Working noise dB(A) ≤75 ≤75 ≤75 ≤78 ≤78 ≤78 ≤80 ≤82
Electric heating power kW 36 40 45 72 80 90 120 135
Total electric power kW 38 42 47 75 87 101 135 147
Inlet (outlet) caliber mm 25 25 25 32 42 50 50 60
Size mm 1500x1000x 1600 1500x1050x 1600 1500x1050x1650 1600x1150x1700 1750x1150x1750 1900x1600x1950 1950x1600x1950 2100x1600x2000
Weight Kg 350 380 400 450 550 650 700 750
   Guarantee Value
Item Guarantee indexes
Moisture content ≤50 PPM
Demulsification value New oil≤15min,running oil≤30min
Impurity size ≤1 micron
Gas content ≤0.1%

Advantages:
Good economic benefits, widely application, it is suitable for purifying various old lube oil in petroleum, chemical,
mining, metallurgy, electric power, transportation, machinery manufacturing, railway and so on.   Industry Lube Oil Polishing System (TYA)




Product Application
Series TYA is widely used in metallurgy, machinery, oil field, chemistry, mine, electric power generation plant,
transportation and manufacturing enterprises for hydraulic oil, gear oil, engine oil, compression oil, freezer oil,
heat treatment oil, compressor oil, refrigeration oil and other industrial oils. It can remove water, gas and eliminate
mechanical impurities, light acid and light hydrocarbon from oil, and improve oil quality, resume its lubricating
property and ensure normal operation of the equipment.


Product Features
1. Three grades filtering structure, including primary filter, second filter and fine filter. Large capacity for holding
particles, Multi-stage filtration system to ensure high filtration precision.
2. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles
3. Duplex-Stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can
rapidly and effectively remove water, gas, particles and volatile matter (such as alcohol, gasoline, ammonia etc.)
4. Automatic backwashing system, improving working efficiency
5. Advanced air cooling system
6. Adopts interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank
heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.
7. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable.
8. High quality filtering components, large capacity for holding particles, anti-corrosion, good mechanical
performance, long lifetime.
Industry Lube Oil Polishing System (TYA)


Technical Parameter
 
Parameters Unit TYA-10 TYA -20 TYA -30 TYA -50 TYA -100 TYA -150 TYA -200 TYA -300
Flow rate L/h 600 1200 1800 3000 6000 9000 12000 18000
Vacuum degree Mpa -0.06 ~- 0.095
Working pressure Mpa ≤0.4
Temperature degree °C 0~100
Power supply
 		 3Phase, 380V, 50Hz(or as needed)
Working noise dB(A) ≤75 ≤75 ≤75 ≤78 ≤78 ≤78 ≤80 ≤82
Electric heating power kW 36 40 45 72 80 90 120 135
Total electric power kW 38 42 47 75 87 101 135 147
Inlet (outlet) caliber mm 25 25 25 32 42 50 50 60
Size mm 1500x1000x 1600 1500x1050x 1600 1500x1050x1650 1600x1150x1700 1750x1150x1750 1900x1600x1950 1950x1600x1950 2100x1600x2000
Weight Kg 350 380 400 450 550 650 700 750
   Guarantee Value
Item Guarantee indexes
Moisture content ≤50 PPM
Demulsification value New oil≤15min,running oil≤30min
Impurity size ≤1 micron
Gas content ≤0.1%

Advantages:
Good economic benefits, widely application, it is suitable for purifying various old lube oil in petroleum, chemical,
mining, metallurgy, electric power, transportation, machinery manufacturing, railway and so on.  

Automatic Feeding Machine

Model: XY-AL200 / XY-AL500 / XY-AL800 / XY-AL1200

Specification:

Automatic feeding machine mainly through the use of 60 tons of hydraulic pressure as the driving force, can be used to push scrap plastic/ tires with hydraulic column extrusion into reactor, the whole operation process is stable, simple and convenient.

Advantages:

Fully automatic design, save time and manpower;

Highly improve the feeding capacity: manually feeding can only reach 150-170KGS/m³. By using the automatic feeding machine, it could reach to 240-280KGS/m³, which greatly improve the feeding capacity.

Automatic Feeding Machine 

 

Automatic Feeder

Automatic Feeder Machine,Pyrolysis Feeder,Auto-Feeder

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl