Ice Flake Machine with Stainless Steel

 

3.Ice description

4. Flake Ice machine structure


 

5. Ice machine advantage

      Automatic flake Ice machine adopts the latest vertical evaporator with inner helix ice cutter.

• High quality, dry and non-caked
• Simple structure and small land area

6. product model
 
7. Packing & Shipping  

1. Standard wooden case.

2. Completely ice machine contain: ice machine, cooling tower, water pump, water pipes and water pipe fittings.

3. Machine come into use, it can be started once electric power and water supply has been connected.

4. All required components for install the machine will be provide.

5.Delivery time: 30 working days

8. Our Services 

1. We have a strong after-sale service team. All the technicians are experienced, they have been to many countries to serve our customers like you.

2. The warranty of the whole machine is 12 months.



9.FAQ
 

Q1: Why don't you choose Ammonia as refrigerant ?

A: 1.As we know, Ammonia, with a strong pungent smell, is a toxic refrigerant. It have strong stimulation to our eyes, nose, throat, lung and skin. It can be danger of fire and explosion when the air concentration of ammonia is more than 15%. Therefore, the ammonia refrigeration system come under a rigorous regulatory approvals by the State administration of work safety.

2.Ammonia refrigeration system is complex, and is too risky to operate.So, it need somebody on duty 24 hours,which increase labor costs.

3.A very low automatic degreeand high power consumption of the equipment of Ammonia refrigeration system lead to a high machine running cost.

Q2: What configuration of the voltage of the machine is ?

A: We adopt standard voltage -380V/3P/50Hz usually, non-standard voltage can be customized, the price is extra.

Q3: What's your usual practice about terms of payment ?

A:The payment can be T/T,L/C,Western Union, Money Gram and in Cash. The deposit is 30%, after we receive your deposit, we will start to produce the machine for you. The balance 70% should be paid before shipping.

Q4: How long is the time of delivery?

A: The delivery time normally is 30 days after we receive the deposit. And If necessary, we will arrange the shipping for you.

 

Chromium Carbide Overlay Blast Furnace Wear Parts

The blast furnace uses steel plates as the furnace shell, and the shell is lined with refractory bricks. The blast furnace body is divided into 5 parts from top to bottom: furnace throat, furnace body, furnace waist, furnace belly and furnace hearth. Due to the advantages of good technical and economic indicators of blast furnace ironmaking, simple process, large production volume, high labor production efficiency and low energy consumption, the iron produced by this method accounts for the vast majority of the world's total iron output.

During the production of blast furnace, iron ore, coke, slag-making flux (limestone) is loaded from the top of the furnace, and preheated air is blown in from the tuyere located at the lower part of the furnace along the furnace periphery. At high temperatures, carbon in coke (some blast furnaces also spray auxiliary fuel such as pulverized coal, heavy oil, natural gas, etc.) burns with carbon monoxide and hydrogen produced by the oxygen blowing into the air to remove iron ore during the ascent in the furnace Oxygen, thereby reducing iron. The molten iron is released from the iron mouth. Unreduced impurities in iron ore combine with flux such as limestone to form slag, which is discharged from the slag port. The produced gas is discharged from the top of the furnace, and after dedusting, it is used as fuel for hot air furnace, heating furnace, coke oven, boiler, etc. The main products of blast furnace smelting are pig iron, as well as by-product blast furnace slag and blast furnace gas.

Chromium Carbide Overlay Blast Furnace Wear Parts,Hardfacing Overlay Distributor Chute,Blast Furnace Wear Parts,Improved Blast Furnace

SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD , https://www.hardfacingplate.com