How to choose a tester

The radon detector uses a patented diffused photoelectrode tube to measure helium concentration. The instrument operates on AC power and can also be powered by a backup battery. Universal data interface to download measurement data reports to your computer. The instrument is equipped with a dedicated micro-printer that can easily print measurement data. The 1027 Continuous Tester has been approved by the US Environmental Protection Agency (EPA).

There are three ways to detect the results: digital display on the panel, a report printed on the printer, the computer display. If the data is downloaded to a computer, the data can be printed by a normal printer. After getting the data, you can clear the memory and start the measurement again. The detector can be removed from the inspection site before printing the data.

Technical Parameters

1. Measurement range: 0.1-999pCi/L (3.7-37000Bq/M3)

(Reference: indoor standard: 200Bq/M3; unit conversion: 1pCi/L=37Bq/M3)

2. Sensitivity: 2.5cph/pCi/L

3, accuracy: 25% or 1/pCi/L

4, data port: RS-232, 9-pin, allowing printer data transmission to the PC

5. Detector: Diffused Optical Semiconductor Detector

6, measurement interval: 1 hour

7, show three digital display

8, power: AC/DC220VAC/12VDC, 200mA

9, spare battery: 9V alkaline battery, up to 20 hours of work

10, weight: 0.9kg

11, size: 200×120×65mm

12, US Environmental Protection Agency evaluation: US EPA approval

main feature

1, semiconductor probe (without replacement)

2, diffusion sampling, rapid detection

3, the concentration is displayed in pCi/L

4, internal data storage

5, RS232 interface can be connected to the computer

6, professional software, data, peak display

7. For continuous monitoring of radon concentration in the air.