Model NO.: JTXE-600
PLC: Mitsubishi, or Siemens
Certificate: ISO
Warranty: 1 Year
After-Sell Service: Yes
Trademark: XIEER
Transport Package: Seaworthy Packing
Origin: Jiangyin
HS Code: 84623920
JTXE-600 Electric Reactor Silicon Steel Cut to Length Line
Cut to Length Line Process Introduction
The reactor silicon steel cutting line can be used for the automatic production of the chip type, and adopts the imported servo control technology, fast speed, lower noise and long life. This equipment is a mechanic photoelectric high-tech product, representing the high standard of domestic silicon steel sheet traverse cutting devices.
Cut to Length Line Equipment Composition
1,Guiding Device
a)Using the vertical roller of both sides, it is easy to enter the device of measuring rod
b)The guide roller on both sides is adjusted by hand screw,the guide roller is mounted on a linear guide,two rolls of rubber roller are on the feeding side.
c)Width range:25-400mm
2,Servo Control Setting Device
a)roller  structure
b)The equipment is composed of a fixed foot roll, servo motor, synchronous belt Gear Reducer, base and so on
c)pinch-roll for determining length:two,down roll is Gcr15 alloy steel,after the adjustment, quenching, grinding and polishing,upper roller outer round polyurethane.
d)control:PLC
e)driving power:Taida AC2.0KW servo motor,the corresponding driver controller is matched.
f)Upper roller can be manually driven up and down.
3,High Speed Servo Drive Shears
a)The equipment is a device that can be cut off with a quick cut according to instructions
b)cutting way:the cutting mode is driven by the servo motor driven by the crankshaft, which is cut from the top downwards, and the shear speed is determined by the motor speed.
c)Blade material:hard alloy. blade hardness:HRC88-90
d)composition:it is mainly composed of wallboard, upper and lower knife-edge and blade, guiding mechanism, crankshaft, servo motor and transmission mechanism.
e)drive motor:Taida AC2.0KW servo motor,the corresponding driver controller is matched.
Electric Reactor Silicon Steel Strip Picture
Parameters1,High Speed High Precision Slitting Line
| Model Name | JT1250 |
| Cutting Thickness(mm) | 0.23-0.5 |
| Cutting Width(mm) | 40-1200 |
| Coil Weight(t) | 5 |
| Feeding Speed(m/min) | 80-120 |
| Straightness Deviation of Each Edge(mm/m) | 0.1 |
| Cutting Angle Accuracy DEG | ±0.025 |
| Band Width Accuracy(mm) | ±0.1 |
| Total Motor Power(KW) | 55 |
2,Precision high speed cut-to-length linenonstop cutting
Two cutting two punching(ordinary type)
| Model Name | JTXE-LL-300 | JTXE-LL-400 |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-300 | 40-400 |
| Cutting Length(mm) | 350-9999 | 350-9999 |
| Feeding Speed(m/min) | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 15 | 16.5 |
Two cutting two punching(step type)
| Model Name | JTXE-LL-300Z | JTXE-LL-400Z |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-300 | 40-400 |
| Cutting Length(mm) | 350-9999 | 350-9999 |
| Feeding Speed(m/min) | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 20 | 21.5 |
Two cutting two punching(centralized positioning)
| Model Name | JTXE-LL-400ZX | JTXE-LL-600ZX |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-400 | 60-600 |
| Cutting Length(mm) | 350-9999 | 350-9999 |
| Feeding Speed(m/min) | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 24 | 26 |
3,Precision high speed cut-to-length linenonstop cutting
Two cutting one punching
| Model Name | JTXE-X-300 | JTXE-X-400 | JTXE-X-600 |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-300 | 40-400 | 60-600 |
| Cutting Length(mm) | 350-9999 | 350-9999 | 350-9999 |
| Feeding Speed(m/min) | 180 | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 12 | 13.5 | 13.5 |
4,Center Post Silicon Steel Cut to Length Line(step type)
| Model Name | JTXE-ZZ-300Z | JTXE-ZZ-400Z |
| Cutting Thickness(mm) | 0.23-0.35 | 0.23-0.35 |
| Cutting Width(mm) | 40-300 | 40-400 |
| Cutting Length(mm) | 150-9999 | 150-9999 |
| Feeding Speed(m/min) | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.1 | ±0.1 |
| Total Motor Power(KW) | 14 | 14 |
5,Electric Reactor Silicon Steel Cut to Length Line
| Model Name | JTXE-300 | JTXE-400 | JTXE-600 |
| Cutting Thickness(mm) | 0.23-0.5 | 0.23-0.5 | 0.23-0.5 |
| Cutting Width(mm) | 40-300 | 40-400 | 40-600 |
| Cutting Length(mm) | 10-9999 | 10-9999 | 10-9999 |
| Feeding Speed(m/min) | 180 | 180 | 180 |
| Cutting Burr(mm) | ≤0.02 | ≤0.02 | ≤0.02 |
| Cutting Angle Accuracy DEG | ±0.025 | ±0.025 | ±0.025 |
| Cutting Length Accuracy(mm) | ±0.05 | ±0.05 | ±0.05 |
| Total Motor Power(KW) | 10 | 10 | 12 |
Electric Reactor Silicon Steel Cut to Length Line Working Process
Cut to Length Line Certificate
Cut to Length Line Packaging
Â
Activated Carbon Regenerative Kiln
Activated Carbon Regenerative Kiln,Activated Carbon Regeneration Rotary Kiln,Activated Carbon Rotary Regeneration Furnace,Activated Carbon Regeneration Stove
Yantai Sino Touch Mining & Construction Equipment Co.,Ltd , https://www.stmcgroup.com