Native gold - arsenic ores typically contain 1-2% to 10-12% arsenic pyrite. Other sulfide minerals are mainly pyrite and pyrrhotite. When both minerals contain particulate gold, gold can be recovered by a combined process of flotation-floating cyanidation. When the gold in the ore is encapsulated in sulfide, the gold-arsenic concentrate or gold-arsenic-pyrite concentrate can be obtained by flotation. If the tailings cannot be discarded, the tailings can be cyanide. Cyanide recovery of all ore. Because the arsenic-containing ore is seriously affected by the leaching rate of gold during cyanidation, the concentrate should be pretreated before cyanidation. The treatment method can separate the gold-containing iron ore and the gold-containing arsenopyrite by flotation; the arsenic in the concentrate can also be removed by roasting. The commonly used sorting process is: flotation-floating roasting-sintering cyanidation.
A Gold Xinjiang arsenic, gold-bearing quartz veins low sulfide ore sulfur. The natural gold in the ore accounts for 53.38%, and other gold is dispersed in the form of fine iron or solid solution in the minerals such as pyrite and arsenopyrite. Most of the gold is found in the fissures, and a small part is encased in quartz and altered surrounding rocks. Gold has a particle size of 0.2 to 0.001 mm, and gold of -0.1 mm accounts for 94%. Fine-grained gold accounts for 42% and is an intractable gold-bearing ore. The original design process is a process of amalgam -flotation-concentrate roasting-cyanide. However, the hazards of mercury poisoning in production are becoming more and more prominent. For ore containing large mud, it is difficult to dehydrate the floating fines, so that the roasting operation cannot work normally, which seriously affects the cyanide leaching rate. After re-election in place of mercury amalgamation, the recovery rate of gold in the shaker concentrate reached 63.43%, and about 60% of the arsenopyrite minerals with high arsenic content were enriched in the re-election concentrate, and the yield of re-election concentrate was only 0.77%. The process is now changed to re-election - heavy sand amalgamation - heavy sand roasting - heavy tail flotation - the combined process of roasting slag and flotation cyanidation. The principle flow chart of its ore dressing is shown in the figure. The advantages of this process are: reduced calcined ore and improved quality of calcined ore. The specific indicators are as follows.
 New process test indicator | ||||||
item       Head | Production   rate | Product    Bit | Recovery rate % | |||
% | Gold g / t | Arsenic % | gold | arsenic | ||
Re-election | Shaker concentrate | 0.7708 | 465.35 | 11.05 | 63.43 | 54 |
Shaker tailings | 1.4792 | 7.578 | 0.12 | 1.99 | 1 | |
Rotary tailings | 97.75 | 2 | 0.074 | 34.58 | 45 | |
Flotation | Float | 5.67 | 27.38 | 　 | 25.96 | 　 |
Floating tail | 92.08 | 0.56 | 8.62 | |||
item       Head | Leach rate % | Washing rate % | Replacement rate % | |||
Cyanide | Shaker | 95.17 | 99 | 99 | ||
Shake tail and float | 85.36 | 99 | 99 | |||
total | 92.17 | 99 | 99 | |||
Food Grade plastic Bag for bread packing. About the size, their width, length and thickness could be just as you order. For the color, they could in clear or other colors as you require. The bags could also be on roll or on sheet. With easy opening technique, our bread bags can keep the breads clean and sanitary and suitable been used in bakery, dessert house,cake shops or market.
Reusable Bread Bag,Linen Bread Bag,Paper Bread Bags,Cotton Bread Bag,Loaf Bread Bags,Bread Plastic Bag
BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmfoodpackagingbag.com