Model NO.: QGI
Name: Gantry Type CNC Plasma and Flame Cutting Machine
Application: Metal Plates Plasma Cutting
Plasma Source: Hypertherm Kjellberg Kaliburn Huayuan
CNC System: Hypertherm Kjellberg Kaliburn Fangling
Drive System: AC Servo Motor Twin-Side Drive
Programming Software: Fastcam Ibe Sigmanest
Bearing: NSK Hrb Zwz
Torch Height Controller: Hypertherm Exc880 Lincoln
Plasma Cutting Thickness: 1-60mm
Flame Cutting Thickness: 6-180mm
Trademark: HuaFei
Transport Package: Plastic Film Cover or Plywood Case
Specification: according to work piece
Origin: Jinan
HS Code: 8461500090
Model NO.: QGI
Name: Gantry Type CNC Plasma and Flame Cutting Machine
Application: Metal Plates Plasma Cutting
Plasma Source: Hypertherm Kjellberg Kaliburn Huayuan
CNC System: Hypertherm Kjellberg Kaliburn Fangling
Drive System: AC Servo Motor Twin-Side Drive
Programming Software: Fastcam Ibe Sigmanest
Bearing: NSK Hrb Zwz
Torch Height Controller: Hypertherm Exc880 Lincoln
Plasma Cutting Thickness: 1-60mm
Flame Cutting Thickness: 6-180mm
Trademark: HuaFei
Transport Package: Plastic Film Cover or Plywood Case
Specification: according to work piece
Origin: Jinan
HS Code: 8461500090
        Economical gantry type cnc plasma cutting machine for sheet thickness less than 25mm

***Cutting machine features
(1) Install easily
(2) Two cutting ways: flame or plasma available.
(3) Tidy cutting surfaces without burr, cutting speed can achieve to 6000mm/min.
(4) Double-side driving servo system, guarantees an excellent running performance.
(5) Optional dust proof work table or smoke removing device for a clean working environment.
(6) Optional plasma power for different materials cutting.
(7) German Neugart planetary reducer for transimission which is characterized of bigger toque, low gap and free maintenance.

***Cutting machine parameter and model
No             item                        specification
1 Horizontal track space(mm) 4000 4500 5000 5500 6000 6500 7000
2 effective cuttin width(mm) 3200 3700 4200 4700 5200 5700 6200
3 Overall width (mm) 4800 5300 5800 6300 6800 7300 7800
4 Cutting mode  flame and plasma 
5 Driving method  rack and pinion drive for X and Y axes 
6 Driving mode double-side driving
7 Flame cutting thickness  6-200mm 
8 Plasma cutting thickness 0-50mm(according to plasma power source) 
9 Cutting speed  0-6000mm/min
10 Empty stroke speed 0-10000mm/min
11 Automatic height 
controller		 capacitive height control for flame cutting
arc voltage height control for plasma cutting
12 Cutting gas acetylene,propane(optional)
13 Plasma gas compressed air,oxygen,N2
14 Marking tool (Optional) yes (Optional)
15 Nesting softwar (optional) Integnps,Fast cam
 

***Service
Warranty: 12 months from the date of Bill of Lading.
    The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
 
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.

          Economical gantry type cnc plasma cutting machine for sheet thickness less than 25mm

***Cutting machine features
(1) Install easily
(2) Two cutting ways: flame or plasma available.
(3) Tidy cutting surfaces without burr, cutting speed can achieve to 6000mm/min.
(4) Double-side driving servo system, guarantees an excellent running performance.
(5) Optional dust proof work table or smoke removing device for a clean working environment.
(6) Optional plasma power for different materials cutting.
(7) German Neugart planetary reducer for transimission which is characterized of bigger toque, low gap and free maintenance.

***Cutting machine parameter and model
No             item                        specification
1 Horizontal track space(mm) 4000 4500 5000 5500 6000 6500 7000
2 effective cuttin width(mm) 3200 3700 4200 4700 5200 5700 6200
3 Overall width (mm) 4800 5300 5800 6300 6800 7300 7800
4 Cutting mode  flame and plasma 
5 Driving method  rack and pinion drive for X and Y axes 
6 Driving mode double-side driving
7 Flame cutting thickness  6-200mm 
8 Plasma cutting thickness 0-50mm(according to plasma power source) 
9 Cutting speed  0-6000mm/min
10 Empty stroke speed 0-10000mm/min
11 Automatic height 
controller		 capacitive height control for flame cutting
arc voltage height control for plasma cutting
12 Cutting gas acetylene,propane(optional)
13 Plasma gas compressed air,oxygen,N2
14 Marking tool (Optional) yes (Optional)
15 Nesting softwar (optional) Integnps,Fast cam
 

***Service
Warranty: 12 months from the date of Bill of Lading.
    The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
 
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.

 

Triangle Tripods

Triangle Tripods,Aluminium Tripods,Ellipse Tripods

Jiangsu Laiao Material Technology Co., Ltd. , https://www.jslaiao.com