If you look at the selection of investment plans, please pay attention to the following questions:
1. The details of this equipment and the estimated budget are for reference only and cannot be used as the basis for the final investment. Therefore, China Mineral Processing Technology Network will not bear any losses caused by customers building factories according to this schedule.
2. The final selection design should be based on the feasible process test report, combined with the needs of the investor and the actual situation on the site, and can be implemented after professional design personnel design and strict technical argumentation.
3. The price of equipment in this list will fluctuate normally according to market conditions, and some equipment models can also be replaced reasonably under appropriate circumstances.
4. If you have any questions, please ask.
70-100 tons / day copper plant equipment list
Equipment category
model
name
Quantity
First, the crushing equipment
600×500
Trough feeder
One
PEF250×400
Compound pendulum jaw crusher
One
PYB-600
Standard cone crusher
One
SZZ 2 900×1800 (25 mm upper mesh, 15 mm lower)
Self-centering vibrating screen
One
B=500 mm L=15-20 m angle=17°-18°
Tape conveyor
Two sets
MW1-6
Magnetic iron hanging down
One
Chain chain hoist
2 sets
B=500
Metal detector
One
Second, grinding classification equipment
¢800
Disc feeder
2 sets
1200×2400
Wet lattice ball mill
One
FLG-750
Sorghum spiral classifier
One
B=500 mm lk=5.5, L=5.5~7 m
Tape conveyor
One
Third, lifting equipment
Manual single beam crane
5 tons
Fourth, flotation equipment
¢1000×1000
Stirring tank
One
XJK-0.35
Flotation machine 8 slots
2 sets
5. Dehydration equipment (with daily processing of copper concentrate below 4.5 tons)
1500×1500
Inclined plate thick box
One
2 m 2
Fan filter
One
SZ-2
Water ring vacuum pump
One
0.2 m 3
Automatic water discharge filtrate cylinder
One
0.5 tons
Taiwan scale
One
(3 m × 1.3 × 10 yards m) 39 m 3.
Sedimentation tank natural precipitation
4
six
300 tons
Weighbridge
One

Foaming Agent OBSH-75GE

OBSH-75GE is a specific type of Foaming Agent used in the production of cellular rubber and plastic materials, particularly in the field of foam rubber. It is designed to facilitate the expansion of rubber and plastic compounds during the vulcanization or foaming process.

Foaming Agent,OBSH Foaming Agent,Chemical Foaming Agents,Best Foaming Agent,Foaming Agent Price

GuangDong DuBa New Material Technology Co.,LTD , https://www.gddubachem.com