EPS Rock and Wool Sandwich Panel Roll Production Line

 Roll Forming Machine Itself
 Picture for refence
c.Main Parts of the Sandwich panel machine
1.1 Leveler for thickness
1.2 Composite rubber rollers
2.1 Glue section
2.2 Glue pumps(Gear Pump)
picture for reference

3.1 Spread uniformly device
4.1 Grooving device
5.1 Into shearing        
c. Electrical Control system Part
c. Roll Forming Machine Itself



Type of forming double layer forming(one layer for trapezoil roof up steel sheet, one layer for corrugated wall up steel sheet).
roof sheet bottom steel sheet's forming and wall panel steel sheet's forming will be done on the sandwich panel main machine, we will add one set mold to change wall penel bottom side steel sheet shape.
Shaft diameter 70mm(solid shaft)
Material of  roller No.45 steel, heat treatment
Frame structure 350# H steel.
Chain 1 inch
Froming stands 16 rows and 20 rows
Speed of forming 6m/min synchronies with panel machine
Type of synchronies electrical synchronies
Driven power 7.5 kw
Cutting power 3.0 kw
Installation instruction two parts
Size of forming machine 8000×1600×1300mm
Weight of forming machine About 4.5t

 Picture for refence
c.Main Parts of the Sandwich panel machine
1.1 Leveler for thickness
1.2 Composite rubber rollers
roller diameter 150 mm
thickness of composite rubber layer 10mm
hardness of composite rubber layer 60

2.1 Glue section
2.2 Glue pumps(Gear Pump)
numbers of pump 4 sets (top and bottom each 2)
Driven power 0.37 Kw
Flow volume of glue 0~0.4 kg per pump
type of flow volume control Change frequency
Scale of glue: (white): (Black)  1:5

picture for reference

3.1 Spread uniformly device
speed of spreading 80 times/min
driven power 0.5kw ×3

4.1 Grooving device
Grooving according to the design requirement
depth of groove 0.5~1.0mm

5.1 Into shearing
type of shearing Electrical

numbers of shear 2 sets (top and bottom each one)
Driven power 0.75KW
     
c. Electrical Control system Part
Electrical Voltage 380V/3Ph/50Hz
Type of controlling PLC (Delta Taiwan)
Transducer 0.4KW (Made in China)







Notes:
(1)Date of delivery: Within 45 days after receipt of the deposit
(2)Warranty period: 1 year, life-long provides the technical guidance
(3)Trainning: the buyer should charge of visa, return ticket, food and accommodation overseas and USD120/person/day for salary.
(4) Need one technicians
(5) Training time: one week (contains the time of installation and adjustment)
(6)We provide Spare part for machine: Easy damaged parts: conk 2 pcs, fuse-link 4 pcs ,Rubber mat 1 pcs,Bolt spanner 1 pcs

if any question, please conatact me freely





 

Tongue And Groove Face Flanges

The Tongue and Groove faces of this flanges must be matched. One flange face has a raised ring (Tongue) machined onto the flange face while the mating flange has a matching depression (Groove) machined into it's face.

Tongue-and-groove facings are standardized in both large and small types. They differ from male-and-female in that the inside diameters of the tongue-and-groove do not extend into the flange base, thus retaining the gasket on its inner and outer diameter. These are commonly found on pump covers and Valve Bonnets.

Tongue-and-groove joints also have an advantage in that they are self-aligning and act as a reservoir for the adhesive. The scarf joint keeps the axis of loading in line with the joint and does not require a major machining operation.

General flange faces such as the RTJ, TandG and the FandM shall never be bolted together. The reason for this is that the contact surfaces do not match and there is no gasket that has one type on one side and another type on the other side.

Tongue And Groove Face Flanges,Tongue & Groove Flange,Groove Flanges,Tongue And Groove Joint Flange

Fuyuan Marine Accessories Co., Ltd , https://www.fuyuanmarineparts.com