1. The box body is made by arc argon welding. The outside of the box adopts high-quality thick iron sheet and the inner shell is made of galvanized sheet, which is resistant to corrosion and high temperature. With the design and color synchronized with the international model, the model is more beautiful and newer.
2. Built-in circulation ventilation makes the temperature more uniform.
101 series drying box with air blowing device, temperature up to 300 °C, A type for digital temperature control, divided into ordinary drying oven, stainless steel liner drying oven, all stainless steel drying oven three. Extra-large (5, 6, 7 and 8) is suitable for the drying of public goods in the production workshop.
Technical Parameters:
model
Operating Voltage
Highest temperature
power
Temperature fluctuation
Evenness
Working size ( mm )
Overall size ( mm )
101A-00
220V
Room temperature -300 °C
2KW
± 1 °C
± 7.5 °C
350*350*350
350×660×663
101A-1
220V
2.5KW
350*450*450
500×810×813
101A-2
220V
3.2KW
450*550*550
600×910×913
101A-3
220V
6KW
500*600*750
650×960×1113
101A-4
380 V
9KW
800*800*1000
1000×1170×1580
101A-5
380 V
12KW
1000*1000*1000
1200×1370×1580
101A-6
380 V
15KW
1000*1200*1200
1200×1570×1780
101A-7
380 V
18KW
1000*1200*1500
1200×1600×2100
101A-8
380 V
21KW
1200*1500*1500
1400×1900×2100
1. Drying box is used for baking, drying or other heating of the sample. The maximum operating temperature is 300 °C. Drying oven works under the conditions of ambient temperature no more than 40 °C and air humidity no more than 85% .
2. Check the electrical insulation performance of the box before use, and pay attention to whether there is any open circuit, short circuit and leakage. There is a vent on the top that opens to remove moisture from the cabinet.
3 , the largest average load of the steel swatches of the test sample is 15 kg. Place it so as not to be too heavy or too dense. Make sure that there is a gap. The test piece cannot be placed on the floor of the studio.
4 , Drying box is prohibited to put flammable, volatile items, so as to avoid explosion
5, power switch, indicator lights for indication, blowing open the switch, the operation of blower motor, a thermometer placed in the tank, temperature adjusting knob turn on the power to a higher position, until the temperature rises to a predetermined temperature, back regulation The temperature control knob is just disconnected from the contact switch and can be thermostatted after a few fine adjustments.
6 , constant temperature. A group of heating switches can be turned off, leaving only one group of heaters to work, so as to avoid excessive power and affect the sensitivity of the chassis.
7. When working, the door should not be opened frequently to avoid affecting the constant temperature field.
8 , After the temperature is reached, it can be used according to the experiment, so that it can be used as a constant temperature for a certain period of time. In this process, the temperature control in the box can be automatically controlled without manual management.
Shangyu Xingxing Instrument Equipment Co., Ltd. is located in Daosu Town, Shangyu District, Shaoxing City, Zhejiang Province. It is a company integrating production, product research and development, processing and trading. The company's main products: series drying oven, incubator series, laboratory muffle furnace series, distilled water series, as well as clean bench, air shower, fume hoods, biological safety cabinets and other complete sets of purification equipment.
The company has a strong technical R & D team, a strong after-sale protection service system, is the leader in China's laboratory complete sets of equipment manufacturers, welcome customers to buy.
Machinery Grease,Semifulid Lithium Grease,Construction Machinery Grease,Semifulid Lithium Base Grease
PUYANG XINYE SPECIAL LUBRICATING OIL AND GREASE CO.,LTD , https://www.xinyelubricant.com