Easy Operating Full Automatic Cheap Scrap Radiator Recycle Machine

Car Radiator Recovery Machine Factory Introduction: 
As a professional metal recycling machines manufacturer, we have been working hard to provide advanced equipment and professional solutions for your metal recycling business. Always endeavored in developing advanced metal recycling technology, we can customize special solutions to help you recycle more efficiently and more cost effectively.
No matter you are engaged in processing copper cables, scrap radiator, scrap motor, aluminum cans, as well as other types of metal, you can find proper solutions here. We manufacture various types of copper cable granulator, wire stripping machine, radiator recycling machine, motor recycling machine, metal crusher and metal baler to meet different requirements for scrap metal recycling. Besides, plastic recycling machine is also in our business range.


Car Radiator Recovery Machine Introduction&Description: 
The radiator recycling machine is used to cut radiators from air conditioners and separate copper pipes from aluminum. Before processed by this machine, the radiators shall be cut with a band saw into pieces of certain width.
It can separate one layer of radiators or 2 layers of radiators. When radiators are more than 2 layers, a band saw is needed to cut them into one layer or two layers. 
 1. Compressing part: It is radiator compressing system, the gear compressor is used for removing alumunum part on the radiator. 
 2. Radiator input plate: Normally there are 3 parts for radiator input, and they have different width for different size radiators. Customer need to put proper size(center distance) radiator on it. 
 3. Handle: There are totally 6 handles on the machine to adjust blades inside it. 
 4. Motor: There are two motors on both sides of the machine. 
 5. Control panel: There are Start,End and Emergency buttons on the panel. 
 6. Blades: Blades used for cutting radiators. 



Car Radiator Recovery Machine Application: 
The width of the radiator copper pipe is 21MM, 25MM, and 19MM. Besides, the thickness is one layer and two layers. Copper tube and aluminum can be recycled and sell directly into market.not only solve pollution problem for environment but also make profit.It can be used in recycling station and some other places.

Car Radiator Recovery Machine Specifications:  
Car Radiator Recovery Machine Packing&Shipping: 
 Normally we pack the radiator recycling machine with plastic film and ply wooden case before shipping. 
 

 We also supply Complete Recycling Line for Scrap Radiator. 
Please contact with us for detail information. 


Contact: 

Tina 
Mobile:+8615981925357 
Car Radiator Recovery Machine Factory Introduction: 
As a professional metal recycling machines manufacturer, we have been working hard to provide advanced equipment and professional solutions for your metal recycling business. Always endeavored in developing advanced metal recycling technology, we can customize special solutions to help you recycle more efficiently and more cost effectively.
No matter you are engaged in processing copper cables, scrap radiator, scrap motor, aluminum cans, as well as other types of metal, you can find proper solutions here. We manufacture various types of copper cable granulator, wire stripping machine, radiator recycling machine, motor recycling machine, metal crusher and metal baler to meet different requirements for scrap metal recycling. Besides, plastic recycling machine is also in our business range.


Car Radiator Recovery Machine Introduction&Description: 
The radiator recycling machine is used to cut radiators from air conditioners and separate copper pipes from aluminum. Before processed by this machine, the radiators shall be cut with a band saw into pieces of certain width.
It can separate one layer of radiators or 2 layers of radiators. When radiators are more than 2 layers, a band saw is needed to cut them into one layer or two layers. 
 1. Compressing part: It is radiator compressing system, the gear compressor is used for removing alumunum part on the radiator. 
 2. Radiator input plate: Normally there are 3 parts for radiator input, and they have different width for different size radiators. Customer need to put proper size(center distance) radiator on it. 
 3. Handle: There are totally 6 handles on the machine to adjust blades inside it. 
 4. Motor: There are two motors on both sides of the machine. 
 5. Control panel: There are Start,End and Emergency buttons on the panel. 
 6. Blades: Blades used for cutting radiators. 



Car Radiator Recovery Machine Application: 
The width of the radiator copper pipe is 21MM, 25MM, and 19MM. Besides, the thickness is one layer and two layers. Copper tube and aluminum can be recycled and sell directly into market.not only solve pollution problem for environment but also make profit.It can be used in recycling station and some other places.

Car Radiator Recovery Machine Specifications:  
Car Radiator Recovery Machine Packing&Shipping: 
 Normally we pack the radiator recycling machine with plastic film and ply wooden case before shipping. 
 

 We also supply Complete Recycling Line for Scrap Radiator. 
Please contact with us for detail information. 


Contact: 

Tina 
Mobile:+8615981925357 

CNC Milling Machining

CNC milling machining is a CNC machine tool trajectory by means of computer controlled machine, using high speed rotating cutting tool if you want to shape the material. With the size of products have become increasingly demanding, machining from the original two gradually changed to 3 axis machining, 4 axis machining, 5 axis machining center, precision can reach 0.001mm. us the maximum machine processing size: 500mm * 1000mm *600mm, 800kg machine under the maximum weight of workpiece, Machine tool spindle speed 20000RPM to ensure that the surface of the workpiece is smooth and clean.we often processed material of aluminum,steel, copper, stainless steel, titanium, POM, Teflon and so on. At the completion of high quality, high dimensional accuracy of CNC milling machining parts process, we will divided into rough machining and processing method fine to get the best effect, the margin size coarse and finish machining is 0.5 * 1mm. after processing some of the products after surface treatment such as plating polishing surface passivation.Sand (powder), anodic treatment (aluminum common CNC anodized black red blue anode, anode, anode). CNC milling machining is widely used in aviation, automotive, communications, medical equipment, electrical appliances, drone.

In addition to,we also provide high precision machining and precision machined parts,supply custom machining services and cnc machining services for small batch.

Cnc Milling Machining,Cnc Precision Milling Machining,Aluminum Profile Cnc Milling Machining,CNC Milling Service

Hong Kong RYH CO., LTD , https://www.cncmachiningpart.com