CNC Tube Return Bender with High Efficiency

The Return Bender machine is used to open, straighten, saw and bend coil copper pipe into return bend, mainly applied to air-condition condenser and evaporator, water heater, etc. It works with full automatic mode.

1. Return Bender is a key equipment for Return Bender Production.
Return Bender connects two legs of hairpin bender by brazing process for heat exchange coil fabrication.Return Bender machine is high effecient for 5 pcs per cycle or 3 pcs per cycle according to different tubing size.
Structure features of return bender:
2.1 Return Bender is an equipment for fully automatic processing,after loading the coil tube,it can finish the sequence with automatically:Feeding→Clamping→Mandrel enter→Sprayer→Bending→Pull mandrel→Cutting→Unloading material→Reposition bending minor elbow of whole action.
2.2 Stock stand of Return Bender Motor Driven stock stand(same as tube cut off machine).
3. Main Electric Components:
3.1 Control system will be Japan OMRON PLC.
3.2 Pneumatic parts will be SMC.
3.3 Hydraulic parts will be Japan Brand Yuken.

Should any of this items be of interested to you please contact us.Thanks for your interesting in our Vertical Expander!
RETURN BENDER TECHNICAL SPECIFICATION:
1. High Precision & Efficiency
2. Tube O.D. 5MM ~ O.D.30MM for Option;
3. Output 2~5 Pcs Per Cycle  due to different Sizes;
4.Efficiency 10~14 Cycles Per Minute

More details please review: www.retamachine.com The Return Bender machine is used to open, straighten, saw and bend coil copper pipe into return bend, mainly applied to air-condition condenser and evaporator, water heater, etc. It works with full automatic mode.

1. Return Bender is a key equipment for Return Bender Production.
Return Bender connects two legs of hairpin bender by brazing process for heat exchange coil fabrication.Return Bender machine is high effecient for 5 pcs per cycle or 3 pcs per cycle according to different tubing size.
Structure features of return bender:
2.1 Return Bender is an equipment for fully automatic processing,after loading the coil tube,it can finish the sequence with automatically:Feeding→Clamping→Mandrel enter→Sprayer→Bending→Pull mandrel→Cutting→Unloading material→Reposition bending minor elbow of whole action.
2.2 Stock stand of Return Bender Motor Driven stock stand(same as tube cut off machine).
3. Main Electric Components:
3.1 Control system will be Japan OMRON PLC.
3.2 Pneumatic parts will be SMC.
3.3 Hydraulic parts will be Japan Brand Yuken.

Should any of this items be of interested to you please contact us.Thanks for your interesting in our Vertical Expander!
RETURN BENDER TECHNICAL SPECIFICATION:
1. High Precision & Efficiency
2. Tube O.D. 5MM ~ O.D.30MM for Option;
3. Output 2~5 Pcs Per Cycle  due to different Sizes;
4.Efficiency 10~14 Cycles Per Minute

More details please review: www.retamachine.com