Model NO.: CTM3
Drive Mode: 6x4
Maximum Horsepower: 200-300hp
Condition: New
Sizes and Details: for More Communications
Certificate: 3c, ISO,BV,GOST,SGS,GMP,
Visit: Welcome
Reputation: Reputation
Engine: 371HP
Emission: Euro II
Front Axle: Hf9 Disc Brake
Tare Weight: 13950kg
Overall Dimensions: 9780mm*2496mm*3990mm
Wheelbase: 4000mm+1400mm
Trademark: HOWO Brand
Transport Package: Nude, RO-RO, Bulk Freigh
Specification: 3c, ISO, BV, GOST, SGS, GMP,
Origin: People Republic of China
HS Code: 8705400000
Model NO.: CTM3
Drive Mode: 6x4
Maximum Horsepower: 200-300hp
Condition: New
Sizes and Details: for More Communications
Certificate: 3c, ISO,BV,GOST,SGS,GMP,
Visit: Welcome
Reputation: Reputation
Engine: 371HP
Emission: Euro II
Front Axle: Hf9 Disc Brake
Tare Weight: 13950kg
Overall Dimensions: 9780mm*2496mm*3990mm
Wheelbase: 4000mm+1400mm
Trademark: HOWO Brand
Transport Package: Nude, RO-RO, Bulk Freigh
Specification: 3c, ISO, BV, GOST, SGS, GMP,
Origin: People Republic of China
HS Code: 8705400000
1. Double Logarithmic Variable Pitch Helical Mixer Blade enables higher charging and discharging speed and equal mixing, eliminates segregation phenomenon, and is suitable for the transportation of both dry and wet materials;
2. New technology T-shape Blade. It is made of hard-wearing alloy steel, and thus protects the mixer blades from abrasion, extends the service life of the agitator drum, and enhances mixing performance;
3. The geometric capacity of the agitator drum is very large and the filling rate is low, thus guaranteeing more mixing space. The small inclined angle and low center of gravity help reduce the possibility of turning over.
4. Closed loop hydraulic system and constant hydraulic oil temperature controller are used. Key hydraulic accessories include: Hydraulic plunger pump, adjuster mechanism with servo, hydraulic motor and reducer are all made by internationally known brands and offer stable and reliable and reliable performances.
5. Pneumatic Water Supple System. The pressure is provided by the air tank on the chassis with pressure protection devices. The Water inlet connector fits for both normal water pipe and fire fitting.
6. Multi-outlet washing design. Cleaning requirements are met by the three fixed pipes for washing the agitator drum, charging hopper and discharging hopper respectively, and another flexible water outlet.
7. Three-point Operation System. One in the cab to allow control of the agitator drum to turn forward and reverse, and to perform the "feed", "discharge", "agitate" and "stop" functions. Two at the rear with one operation handle at each side to perform "charge" "accelerate", "discharge", "agitate" and "stop". Three are interlocking.
8. Colors can be customized.
Product Description
HOWO 6x4 Concrete Mixer Truck In stock with Special Offer
Lead Time: 5 days
Quantity: Only 5
Price: USD52000-55000/unit FOB Shanghai port
Engine 371HP
Emission standard Euro II
Gear box Manual operating, HW19710
Front Axle HF9 Disc brake
Rear Axle HC16, speed ratio 4.8
Tyre 12R22.5
Mixer Drum
Volumn 10CBM
Water Supply Patterns Air Pressure
Tilt 11-13
Hydraulic Reducer, Motor, Pump Made in Europe/United State
We also have Other mixer trucks:
4x2 small / mini mixer truck, 6x4 mixer truck, 6x6 mixer truck, 8x4 mixer truck, 3axles mixer semi trailer....
Drive Type |
Mixing tank capacity | Chassis brand |
4x2 | 2cbm to 6cbm | Dongfeng,yuejin,forland,CDW,etc |
6x4 | 8cbm to 12cbm | Dongfeng,FOTON,SINOTRUK,SHACMAN,JAC,Beiben,HINO,etc |
8x4 | 10cbm to 16cbm | Dongfeng,FOTON,SINOTRUK,SHACMAN,JAC,Beiben,HINO,etc |
mixer semi trailer |
 MAIN DESCRIPTION | |||
 Overall Dimensions |
 9780mm*2496mm*3990mm(L*W*H) |
||
 Tare Weight |
 13950kg |
 Payload |
 28000kg |
 Front Overhang |
 1500mm |
 Rear Overhang |
 2880mm |
 Wheelbase |
 4000mm+1400mm |
 Track (F/R) |
 2022mm/1830mm |
 CHASSIS | |||
 Chassis Brand |
 SINOTRUK HOWO |
||
 Chassis Model |
 ZZ1257N4048W, driving type 6x4 |
||
 Cab |
 HW76, left hand drive, air-conditioner, one sleeper |
||
 Engine |
 SINOTRUK WD615.47, 371hp(273KW), Euro II emission standard, 4-stroke direct injection diesel engine, 6-cylinder in-line with water cooling, turbo-charging and inter-cooling, displacement 9.726L |
||
 Transmission |
 HW19710, No. of speeds: 10 forward 2 reverse |
||
 Steering |
 German ZF8098, turning system pressure 18MPa |
||
 Rear Axle |
 HC16 tandem axle, rated load 2x13ton, ratio 5.73 |
||
 Wheels and tires |
 Rim 9.0-22.5; tire 12R22.5, 10 units; Spare wheel carrier: with one spare wheel |
||
 Brakes |
 Service brake: Dual circuit pneumatic brake; Parking brake: Spring energy, compressed air operating on rear wheels; Auxiliary brake: Engine exhaust brake |
||
 MIXING SYSTEM | |||
 Mixing Volume |
 10cbm |
||
 Water Tank Volume |
 440L |
||
 Hydraulic Pump |
 Brand: ARK, Italy |
||
 Motor |
 Brand: ARK, Italy  |
1. Double Logarithmic Variable Pitch Helical Mixer Blade enables higher charging and discharging speed and equal mixing, eliminates segregation phenomenon, and is suitable for the transportation of both dry and wet materials;
2. New technology T-shape Blade. It is made of hard-wearing alloy steel, and thus protects the mixer blades from abrasion, extends the service life of the agitator drum, and enhances mixing performance;
3. The geometric capacity of the agitator drum is very large and the filling rate is low, thus guaranteeing more mixing space. The small inclined angle and low center of gravity help reduce the possibility of turning over.
4. Closed loop hydraulic system and constant hydraulic oil temperature controller are used. Key hydraulic accessories include: Hydraulic plunger pump, adjuster mechanism with servo, hydraulic motor and reducer are all made by internationally known brands and offer stable and reliable and reliable performances.
5. Pneumatic Water Supple System. The pressure is provided by the air tank on the chassis with pressure protection devices. The Water inlet connector fits for both normal water pipe and fire fitting.
6. Multi-outlet washing design. Cleaning requirements are met by the three fixed pipes for washing the agitator drum, charging hopper and discharging hopper respectively, and another flexible water outlet.
7. Three-point Operation System. One in the cab to allow control of the agitator drum to turn forward and reverse, and to perform the "feed", "discharge", "agitate" and "stop" functions. Two at the rear with one operation handle at each side to perform "charge" "accelerate", "discharge", "agitate" and "stop". Three are interlocking.
8. Colors can be customized.
Product Description
HOWO 6x4 Concrete Mixer Truck In stock with Special Offer
Lead Time: 5 days
Quantity: Only 5
Price: USD52000-55000/unit FOB Shanghai port
Engine 371HP
Emission standard Euro II
Gear box Manual operating, HW19710
Front Axle HF9 Disc brake
Rear Axle HC16, speed ratio 4.8
Tyre 12R22.5
Mixer Drum
Volumn 10CBM
Water Supply Patterns Air Pressure
Tilt 11-13
Hydraulic Reducer, Motor, Pump Made in Europe/United State
We also have Other mixer trucks:
4x2 small / mini mixer truck, 6x4 mixer truck, 6x6 mixer truck, 8x4 mixer truck, 3axles mixer semi trailer....
Drive Type |
Mixing tank capacity | Chassis brand |
4x2 | 2cbm to 6cbm | Dongfeng,yuejin,forland,CDW,etc |
6x4 | 8cbm to 12cbm | Dongfeng,FOTON,SINOTRUK,SHACMAN,JAC,Beiben,HINO,etc |
8x4 | 10cbm to 16cbm | Dongfeng,FOTON,SINOTRUK,SHACMAN,JAC,Beiben,HINO,etc |
mixer semi trailer |
 MAIN DESCRIPTION | |||
 Overall Dimensions |
 9780mm*2496mm*3990mm(L*W*H) |
||
 Tare Weight |
 13950kg |
 Payload |
 28000kg |
 Front Overhang |
 1500mm |
 Rear Overhang |
 2880mm |
 Wheelbase |
 4000mm+1400mm |
 Track (F/R) |
 2022mm/1830mm |
 CHASSIS | |||
 Chassis Brand |
 SINOTRUK HOWO |
||
 Chassis Model |
 ZZ1257N4048W, driving type 6x4 |
||
 Cab |
 HW76, left hand drive, air-conditioner, one sleeper |
||
 Engine |
 SINOTRUK WD615.47, 371hp(273KW), Euro II emission standard, 4-stroke direct injection diesel engine, 6-cylinder in-line with water cooling, turbo-charging and inter-cooling, displacement 9.726L |
||
 Transmission |
 HW19710, No. of speeds: 10 forward 2 reverse |
||
 Steering |
 German ZF8098, turning system pressure 18MPa |
||
 Rear Axle |
 HC16 tandem axle, rated load 2x13ton, ratio 5.73 |
||
 Wheels and tires |
 Rim 9.0-22.5; tire 12R22.5, 10 units; Spare wheel carrier: with one spare wheel |
||
 Brakes |
 Service brake: Dual circuit pneumatic brake; Parking brake: Spring energy, compressed air operating on rear wheels; Auxiliary brake: Engine exhaust brake |
||
 MIXING SYSTEM | |||
 Mixing Volume |
 10cbm |
||
 Water Tank Volume |
 440L |
||
 Hydraulic Pump |
 Brand: ARK, Italy |
||
 Motor |
 Brand: ARK, Italy  |