2. Always inspect the seals of the connecting parts, switches, and suction hoses of the waterway system. If any leakage is found, the seals should be immediately restored or replaced.
3. Regularly check the fixed conditions of the water tank, pump frame and bracket. All nuts should be tightened to ensure firm and reliable connection.
4. Regularly check the connection between the power take-off device and the water pump. The connection should be reliable and operate normally. If the power take-off box and the water pump shaft leak are found during use, the seal should be replaced.
5. The entire waterway system has no anti-freeze device. Therefore, in cold areas, after the temperature is below ‧ degrees Celsius, the water in the water pump, water tank and waterway system should be put on the net immediately. Note that the water pump water release screw plug should be closed tightly after discharge to ensure Sealed, otherwise it will affect the water pump.
6. The paint on the tank must not be exposed to gasoline and kerosene, as this will accelerate the paint damage. Check the quality of the paint on the cans on schedule. When the paint is seriously damaged, make up the paint immediately to prevent the cans from being rusted.
7. The use and maintenance of automobile chassis and engine parts are detailed in the instruction manual for trucks.
8, the ball through the medium should not be dirty, so as not to scratch the seal ring, reducing the life of the ring valve, the ball valve should not be long-term work in a half-open state, otherwise easy to make the seal ring deformation.
9. Into the pump filter should be frequently washed and disassembled to prevent the dregs from clogging the filter screen and affecting the flow.
10. Due to the wooden rubber pad between the tank body and the car girder, the U-bolts will loosen due to the deformation of the wood glue after loading. Therefore, after the car is heavily loaded, U-bolts must be tightened regularly, especially the new car. This must be done when used.
About Silicone Straw:
Straw is common in our life,when we would like to drink some juice,coffe,beer etc,and if you want to elegant to drink it,in this time we can use it.But when we want to drink some hot drinks what can we do it?Yes,use the silicone straw.The temperature at which silicone straw is -40- +240℃ and it is made of food grade silicone.Silicone texture is soft,it is not like stainless steel or plastic that to hurt our mouth.More inportant,the silicone can be reusable and it is be easy to clean.Now,more and more people use silicone straw in all over the world.
Why don't you choose our silicone straw to expend your business?
Silicone Straw introduction:
1.Product name:Silicone drinking straw,food grade silicone straw,silicone straw tips,clear silicone straw,silicone reusable straw.
2.Place of origin:Guangdong China
3.Color:any pantone color
4.Logo:Printing,debossed,embossed
5.MOQ:500pcs.
6.Package:1 pcs/opp,customized design is available.
7.Design:Customized/stock
8.Certification:FDA,LFGB,SGS,ROHS,etc.
9.Usage:For drinks/Bar accessories.
10.Silicone Straw photo's for reference.
Silicone Drinking Straw,Food Grade Silicone Straw,Silicone Straw Tips,Clear Silicone Straw,Silicone Reusable Straw
Dongguan OK Silicone Gift Co., Ltd. , https://www.dgsiliconebabyproducts.com