When the dump truck is unloading cargo, it may be because when the unloaded area is tilted because of the tilted cargo, because some cargo gaps are relatively large, there is a space that can be compressed. In the case of a heavy dump truck , due to the relatively large pressure of the unit's area, it will cause a local subsidence, resulting in the contact position between the driving wheel and the ground on both sides of the vehicle. Tilted situation. The dumping of dump trucks will also occur. So what are the common side-tripping reasons?
1. The dump truck is unloading the ground, because the slope of the ground will be larger and not flat and will produce sideways. When the dump truck is loading and unloading cargo, the selected ground should be quite steep and relatively flat. If the leveling situation is poor, it will also lead to accidents.
2. The loading and unloading location of dump trucks cannot be chosen on those softer floors.
3. When the dump truck is properly loaded and unloaded, it is necessary to strictly observe the safety operation rules of the vehicle. After the vehicle is in the parking brake, the cargo can be loaded and unloaded. If the location of loading and unloading is chosen on an uneven road, because the carriage is also in an elevated state. It will cause the goods to slide off and cause the dump truck to roll. Because on this uneven road, the addition of a carriage or lift will cause the upper part of the vehicle to sway. Rollover accident.
4. When the dump truck is carrying out loading and unloading operations, because the light is darker in the dark, or the surrounding environment is not in very good condition, and the driving does not observe the loading and unloading conditions, it may be The accidental rollover accident was caused by the improper location of the truck.
LED Strobe Beacon,Warning Beacon Light,LED Emergency Strobe Beacon,Safety Strobe Beacon
Shaoxing Groupstar Electric Appliance Co., Ltd. , https://www.led-auto-lamps.com