- Model NO.: K4-BC
- Material: Carbon Steel
- Application: Grain Transport, Mining Transport
- Voltage: 380V,50Hz, 3pH
- Dimension(L*W*H): L1000*W500*H80
- Belt Material: PVC/PU
- Frame Material: Square Tube
- Speed V: Variable 12~120 M/Min
- Trademark: MechTouch
- Specification: Load Capacity: 50kg/m
- Structure: Belt Conveyor
- Material Feature: Oil Resistant
- Condition: New
- Power(W): 0.37-4.00 Kw
- Conveyor: Belt Conveyor
- Transportation: Carton, Drum, Steel Container etc.
- Height: 300-1000 mm
- Color: Customized
- Transport Package: Wooden Case/ Wooden Pallet
- Origin: Huzhou, Zhejiang, China
Â
Production Description
  Â
  K4-BC belt conveyors use a continuous and flexible flat belt to convey cartons and totes. The belt is
arranged as a continuous loop drivenby the drive pulley and tensioned by means of a take up roller.
The friction force between the rotating pulley and the belt drives the belt forward.Â
Â
Applicable Industries
Chemical industry, light industry, mechanical industry, E-commerce industry, electronics industry,
pharmaceutical industry, foods industry,tobacco industry, post and telecommunications industry, etc.
   Â
Environment requirement
1.-Temperature and humidity: temperature:-25 to 40ºC; humidity: below 80%.
2.-Indoor (no direct sunlight or direct contact with water).
3.-Environment: no corrosive gas, no explosive gas, no steam.
Â
Control system
An easy to operate control system dependent project size and requirement to control equipment
including start-stop,speed, diverting, merging, steering of goods as well as identification detection system.
Â
Â
Â
Technical data:
No. |
Type |
Specification |
 1 |
Frame width |
317,417,517,617,717,817,917 |
 2 |
Length of odd sections (mm) |
300-2850, increments of 150 |
 3 |
Speed V (m/min) |
12-120 |
 4 |
Max. load capacity (kg/m) |
Max: 50 |
 5 |
Power supply |
380V/3ph/50Hz (default) 380V/ 3ph/ 50Hz |
 6 |
Drive type |
Roller chain (default) Timing belt |
7 |
Motor mounting mode |
Under slung on left (default) Under slung on right |
8 |
Support type |
ST floor support (TOR≤2.38m)(default) Hanger (TOR>2.38m )(default) |
 9 |
Belt type |
Flat belt Rough top |
10 |
Belt joint |
Steel clasp (default) Glued joint |
11 |
Auxiliary take up |
Add center take up if total length over 20m |
12 |
Guard rail |
None (default) Angle steel |
Â
General
This inspection procedure states the method and way of recording the measuring of the manufacturing tolerances for the product.
Inspection and reporting is where nothing else is stated done by MechTouch.
Â
Method
Each roller has to be checked regarding:
1. That the individual marking is correct and intact.
2. The total roller length.
3. The lengths of the shafts.
4. That the holes in the shafts are correctly positioned.
5. That the shafts are undamaged.
6. The out of truth in five positions using a dial test indicator.
7. That the welds, according to the drawing, are correct.
Â
Checking List
1. Correct wood has been used as packing material.
2. The goods have been packed so it cannot move during transportation.
3. The container or truck has been filled up with goods.
4. A forklift is enough to unload the goods on site.
5. No package weighs more than 4000(kg).
6. The goods is packed without metal to metal contact.
7. Marking of the individual components has been done.
8. Packing list is present and clearly visible.
9. Pictures of marking and packaging have been sent to the customer.
Â
 pallet & case
Â
FactoryÂ
 Manufacture
Â
Quality Detection
Â
Concact
Tower Crane spare parts refer to the components and accessories that are used to replace damaged or worn-out parts of a tower crane. Some common tower crane spare parts include:
1. Hoist motors: These are used to lift and lower heavy loads in a tower crane.
2. Slewing motors: These motors are responsible for rotating the tower crane.
3. Wire ropes: Wire ropes are used for lifting and lowering loads in a tower crane.
4. Safety devices: These include limit switches, load moment indicators, and anti-collision systems, which ensure safe operation of the tower crane.
5. Control panels: These panels include buttons, switches, and control systems that allow operators to control the movements of the tower crane.
6. Hydraulic pumps and cylinders: These components are used to control the movement of the tower crane's jib and trolley.
7. Electrical components: These include circuit breakers, contactors, relays, and fuses, which are essential for the electrical functioning of the tower crane.
8. Bearings: Bearings are used to reduce friction and facilitate smooth movement of various parts in the tower crane.
9. Brakes: Tower cranes are equipped with various types of brakes, including hoist brakes, slewing brakes, and trolley brakes, which help in controlling the movement of the crane.
10. Ladders and platforms: These are used for accessing different parts of the tower crane for maintenance and repair purposes.
Tower crane spare parts are essential for ensuring the smooth operation and maintenance of tower cranes, as they help in replacing worn-out or damaged components and ensuring the safety and efficiency of the crane.
Luffing Tower Crane Parts,L46A1 Mast Section,Crane Fixing Angle,Tower Crane Collar Frame,Tower Crane Parts List
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sysuspendedplatform.com