In the process of asphalt sprinkler spreading the road surface, it is necessary to pay attention to the amount of asphalt in the vehicle tank at any time. When spouting nozzles blow out the asphalt containing bubbles, it directly indicates that the asphalt in the asphalt sprinkling tank has been sprayed. At this time, the three-way valve should be immediately closed and stopped. Continue spraying. The pipeline is then evacuated. Hot nozzles, torches, and pipes can be used to melt away the bitumen that remains in the tank. Then all the bitumen is brought back into the tank.

1. Asphalt is a flammable object, and the asphalt sprinkler is often used with an open fire. When using an open flame, relevant fire-fighting equipment should be stored.

2. It is not allowed to add fuel oil and oil to the asphalt sprinkler when the flamethrower is ignited.

3. When the filling hole on the top of the asphalt tank of the asphalt sprayer and the suction port are not covered, it is not allowed to use ignition gas.

4. When the ignition burner of the asphalt sprayer is ignited, the chimney cover on the tank should be opened before operation.

5. When the vehicle is in the process of spraying, burners cannot be used.

6. When heating the asphalt in the tank body of the vehicle, the page of asphalt in the tank needs to be higher than the height of the U-shaped fire tube, that is, the fire tube must be submerged.

7. When the portable burner is ignited, the switch of the fuel pipeline of the vehicle is first to open a part of it, and then it can gradually be fully opened, and flammable items cannot be touched.

8. The pressure of the compressed air used by the burner must be limited to a pressure value of 0.4 MPa to 0.3 MPa.

9. After the burner of the vehicle is extinguished, the intake switch of the fuel tank should be turned off, and the remaining pressure in the tank should be completely removed. If the spraying work is carried out with a width of 7 meters, it is necessary to avoid it at all times and notice the collision between the vehicle spraying pipe and the surrounding obstacles.

Transmission Parts is components of transmission system, transmission system is generally made up of the clutch, transmission, universal transmission device, main gearbox, differential and half shaft etc.Its basic function is the power coming from the engine to the car driving wheel, a driving force to produce, make the car can drive in a certain velocity.

For the front-engine car, the torque provided by the engine, in turn, passed to the rear wheeles from the clutch, gearbox, universal joint, drive shaft, the main reducer, differential and half shaft, so the rear wheel is known as driving wheel. When the drive wheels get the torque, it will give a backward forces on the ground, and so a forward to driving wheels of reaction, the reaction is the driving force of the car. The front wheel of the car usually don't have relationship of power with the transmission system, it is why it is called driving wheel.

Transmission Parts

Transmission Parts,Aluminum Die Casting Transmission Housing,Transmission Gears Spare Parts,Transmission Gearbox Parts

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.blcastings.com