Application of Wear-resistant Ceramic Linings in Magnetic Separators

Mine magnetic separator drum wear-resistant ceramic sheet wear is the first wear-resistant material technology. Due to the excellent wear resistance and non-magnetic characteristics of the wear-resistant ceramic sheet, it has superior performance unmatched by other metals and non-metal materials, and can replace austenitic stainless steel, wear-resistant rubber, wear-resistant non-metal coatings, etc. Widely used in iron ore beneficiation equipment, especially on the cylinder of magnetic separator, the service life can be improved more than 5 times than that of wear-resistant rubber , and the performance-price ratio is more than doubled. Super hard wear Wear-resistant ceramic hardness HRA ≥ 85 , high can reach HRA92 or more, its resistance to particle erosion wear is more than 10 times that of domestic wear-resistant rubber , imported rubber more than 3 times; Uniformly non-magnetic Wear-resistant ceramics do not have any magnetic properties and have irreplaceable superior properties with other wear-resistant metal materials; High separation rate As the wear-resistant ceramic has good surface characteristics, it can effectively improve the separation efficiency of iron powder and improve the grade of iron powder. Safe and reliable The use of high-strength non-magnetic adhesives, so that the combination of wear-resistant ceramic and metal cylinder strength can reach shear strength of 30MPa ; above, and excellent toughness, can adapt to a variety of temperature changes and vibration conditions. Wide range of adaptation Wear-resistant ceramics are mainly used for non-magnetic magnetic separator cylinder equipment to replace the wear-resistant rubber wear layer on the surface of austenitic stainless steel. In addition, it can also be used on a variety of equipment with serious wear and tear, including various chutes, pipelines and other equipment; The main product specifications: The standard specifications of wear-resistant ceramics are 10×10×3 , 10×10×1.5 , 20×20×3 , and can also be customized according to the user's requirements. The service mode is flexible: 1. Provide a new composite wear-resistant ceramic magnetic separator cylinder; 2. A variety of old magnetic separator cylinder site repair construction; 3. Provide technical training and raw materials by the user's own construction.