- Model NO.: XC-DB100kg
- Operational Method: Continuous
- Drying Medium: Air
- Heating Mode: Heated Air
- Type of Flow: Parallel Flow
- Sprayer: Air-Flowing Type
- Heating Power: 6kw
- Dimension: 1225*822*572mm
- Lifetime: More Than 5 Years
- Machine Controller: P.I.D Microcomputer
- Specification: 100kg European style
- HS Code: 8419399090
- Structure: Air Flow Drier
- Operation Pressure: Vacuum Dryer
- Appearance of Dried Sample: All Type Plastic
- Movement Way: Hot Wind Blow
- Type of Atomization: Rotary Atomization
- Capacity: 100kg
- Blower Power: 250W
- Height: 1725mm
- Certificate: CE
- Trademark: XIECHENG
- Origin: Jiangmen City, Guangdong, China
Features of 1000E~3000E giant hopper dryers;
Double layer construction of heat preservation and power saving with elegant appearance;
Downward blowing and circumfluent hot air assures even drying and high efficiency;
Contacting parts made of stainless steel to assure purity of material;
Airtight door for easy cleaning;
PID for accurate temperature controlling;
High temperature protective devices for safety.
Working Principle:
In the drying process, hot air with constant temperature is blowed by a blower into a two-layer insulated hopper to dry the materials. Moisture will be separated out and taken away by hot air, thus to gain a satisfied drying effect.
Globe valve, also known as cut-off valve, is a mandatory sealing valve, so when the valve is closed, pressure must be applied to the valve disc to force the sealing surface not to leak. When the medium enters the valve from under the valve disc, the resistance that the operating force needs to overcome is the friction force between the valve stem and the packing and the thrust generated by the pressure of the medium. The force to close the valve is greater than the force to open the valve, so the valve stem The diameter of the valve should be large, otherwise the failure of the top of the valve stem will occur. According to the connection method, it is divided into three types: flange connection, thread connection and welding connection. After the appearance of the self-sealing valve, the medium flow direction of the globe valve is changed from the top of the valve disc into the valve cavity. At this time, under the action of the medium pressure, the force to close the valve is small, but the force to open the valve is large, and the diameter of the valve stem can be adjusted accordingly. decrease. At the same time, under the action of the medium, this form of valve is also tighter. my country's valve "Three Chemicals" once stipulated that the flow direction of the globe valve should be from top to bottom. When the globe valve is opened, the opening height of the valve disc is 25% to 30% of the nominal diameter. The flow rate has reached the maximum, indicating that the valve has reached the fully open position. Therefore, the fully open position of the globe valve should be determined by the stroke of the valve disc.
Shut-Off Valve,Shutoff Valve,Automatic Shut Off Valve,Auto Shut Off Valve
Jiangsu Qiantu Trading Co., Ltd. , https://www.qiantupump.com